Are you a Hygiena customer in Australia? Click here

SearchSearch
Close search
SystemSURE Plus hero

Hygiena® SystemSURE Plus

SystemSURE Plus™ is the next-generation system of the world’s best-selling SystemSURE II ATP hygiene monitoring system. With improved functionality, new software, and increased memory, the SystemSURE Plus meets the demands of the largest and smallest companies around the world.

Image
Next image
Play
Image
Image
Image
Next image

SystemSURE Plus™ is the next-generation system of the world’s best-selling SystemSURE II ATP hygiene monitoring system. With improved functionality, new software, and increased memory, the SystemSURE Plus meets the demands of the largest and smallest companies around the world.

SystemSURE Plus

Science-Based Cleaning Verification System

In today’s age, visually clean is no longer good enough! Hospitals need a scientific way to quantify cleaning. Hygiena™ ATP cleaning verification quantifies your cleaning outcomes to help you reduce HAI and keep your staff and patients safe.

Image

Quantify Cleanliness

ATP bioluminescence is the only rapid cleaning verification method that science-based and data-driven. Learn why ATP cleaning verification is the best fit for the health care industry, and out-performs traditional methods, visual inspection, and fluorescent gel.

ATP Methods Rapid Quant

Align with CDC Recommendations

The Centers for Disease Control and Prevention (CDC) recommends that hospitals use an objective monitoring system to ensure health care facilities’ cleaning standards are met. Check out our summary of the CDC recommendations for meeting cleaning verification standards.

ATP Methods Compliance

Improve Cleaning Compliance

Implementing a monitoring system to validate cleanliness has been shown to increase compliance to cleaning procedures from 40% to 82%. Since approximately 90% of your cleaning budget is spent on labor, it’s important for the job to be done right the first time.

Superior Performance

The data speaks for itself. The most comprehensive evaluation of ATP hygiene monitoring systems has been completed by one of the world’s premier food and beverage reference laboratories. They evaluated these four key areas of performance.

 

Linearity

Linearity

The linearity graph shows a direct, proportional, straight-line relationship between RLU and ATP for the Hygiena® system. The closer to linear a system can get, the more precise and reliable the results will be. Systems that deviate from linear offer less reliable results and less sensitivity. The data in the graphic demonstrates the Hygiena system is among the most linear on the market.

Repeatability

Repeatability

Repeatability is described by Coefficient of Variation (CV). The higher the CV, the greater the variability between each result with the same sample. More variability means the results are more inconsistent and unreliable. The graph shows that Hygiena systems consistently deliver dependable results with the lowest CV.

Sensitivity

Sensitivity

Sensitivity is defined as the Limit of Detection (LoD). It is the smallest amount of ATP detectable above the background noise of the system. Background noise is the RLU detected by the system in the absence of ATP. Background noise may come from both the instrument (as electrical interference), and the reagent swab device (as chemical interference). Hygiena systems detect the lowest levels of ATP.

Accuracy

Accuracy

To test accuracy, 100 fmoles of ATP was added to each test device and measurements were taken (using 10 replicates) to determine how much of the available sample was actually detected. Results less than 100% indicate that only part of the sample was detected due to some interference within the system. Results over 100% indicate extra signal coming from the test device. Hygiena’s system is the closest to 100%, thus the least variable.

Better Design

Every feature of the SystemSURE Plus™ monitoring system was built with you, the customer in mind and to meet the demands of your facility.

Photodiode (PD) sensor technology

Better Technology in a Smaller Box

The SystemSURE Plus uses state-of-the-art Photodiode (PD) sensor technology that provides superior sensitivity and stability over fragile and bulky photomultiplier tube (PMT) sensors. The small, thin and sleek design of the photodiode has several advantages over PMT. They’re more durable and more energy-efficient.

Ensure Battery Life

Battery Power for Months

The SystemSURE Plus™ runs on two AA batteries providing long battery life so you don’t have to worry about charging the unit every day. You can expect up to 8-12 months of uninterrupted use before needing to change the batteries. Replacement batteries are very affordable, while other systems use batteries that are expensive to replace and only last 6-8 hours with a minimum charge time of 2 hours.

SystemSURE Plus Read Chamber

Removable Read Chamber

Unique to the SystemSURE Plus™ is the removable read chamber, which makes cleaning easy. The demands of some facilities can commonly lead to contaminated read chambers. Other manufacturers require you to ship your system back if the read chamber becomes contaminated, resulting in costly repairs and delays. Hygiena’s system is designed so you can quickly clean the read chamber, reducing downtime and saving money.

SystemSURE Plus Durable Shell

Maximum Durability

The SystemSURE Plus™ has a durable outer shell and keypad are meant to last. The splash-proof keypad won’t let moisture in and the robust outer shell is sturdy to withstand the shock of minor drops and years of use.

SystemSURE Plus

Design For One Hand Use

Even when you already have your hands full, the sleek design of SystemSURE Plus™ makes scrolling and selecting test locations a breeze. It is completely operable with one hand, making your life that much easier. Dimension are 3″ x 7″ x 1″ (7.6cm x 17.8cm x 3cm).

SystemSURE Plus Carry Case

Work Hands-free Wherever You Go

Each SystemSURE Plus™ comes with a complimentary protective carrying case and shoulder strap so you can work hands-free wherever you go. The carrying case and shoulder strap minimize potential drops to keep your device safe while on the go.

SystemSURE Plus Calibration

Verify Calibration at Your Convenience

With built-in sensor checks and a Calibration Control Kit sold separately, verifying calibration is literally effortless. Simply turn on the self-check feature and every time the system is powered on, calibration will be confirmed. If your HACCP or GMP program calls for additional calibration assurance, use the Calibration Control Kit to verify the system is in working order at any time. With the internal self-check and the calibration kit, you’ll always be confident the system is within specifications. In addition, you’ll avoid costly and inconvenient yearly calibration charges that other manufacturers require.

Related News

See all news